OK, so here the problem I pulled the dash off to replace the heater motor. Put everything back to together and now my blinkers aren't working properly. What I'm getting is dim green led that's on constant, if the flip the stalk to use the blinker the green light get brighter not does not blink. Everything else seems to work fine. The hazards to work. I check the connections on the steering column and they all seem to be OK. I have cruise control on that same stalk and that works fine as well. Anyone have a good starting point for tracking this down. I looked of loose grounds or connections but I'm not seeing anything. thanks JFF
'87 Syncro Adventurewagen: Vincent Van-Go |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.