The wires come from a connector plugged into the back of the heater fan switch. There is also a brown ground wire running over to the main ground stars where it can be unplugged. The power wire from the fuse panel to the fan switch connector can be released from the connector shell with a jewelers flat blade screwdriver. Mark Jim Felder wrote: > I just now got to the point where I could lift the heater core of my 90 > clear of its mounts... except for one thing: the wires that power and > control the heater motor. > Is there a connector I am not seeing? Do most people just cut them and > solder them back later? > > I read everything I could find on the list about removing the dash and > heater, and because of that information it was a very quick job, no problems > at all. Until these wires! > > Also, what is the tall silver electronic box that bracket to the crossmember > behind the blove box and just to the right of the heater plenum? It has a > bunch of wires going to it. > > Jim > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.