Kim, You can reseal it with the yellow stuff that comes with the engine gasket kit. Or if you don't have any of that you can use blue permatex or ultra blue. The problem is that some times what is really going on is that they head has cracked externally near the head nut area. This is a common failure of factory VW heads. In that case your only fix would be to pull the head and install a new one along with a new gasket. If you have a 1.9l engine the heads for this have been discontinued about three years ago so you would want to replace both heads with new 2.1l versions. It will work no problems as long as you replace them in pairs. Let me know if I can help you further, Ken Wilford John 3:16 www.vanagain.com
Kim Springer wrote: > On another note, I have a very small coolant leak coming from an upper head > nut. I've never heard this mentioned and didn't find anything in the > archives. > > I know the head studs are in the cooolant jacket and that sealant is used to > seal the studs to the heads. > > Boston Bob, Jeff, any experience with this? Subi time Benny Boy? > > Thanks, > > Kim > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.