John Bange <jbange@GMAIL.COM> writes: > I went for the Van-Cafe VDO gauge kit > http://www.van-cafe.com/vanagon_parts.jsp?pa=p&p=297115875 and I > found it to be fairly easy to install. The most awkward part is > punching a hole in the engine tin to route the extension tube > through. The rest is a snap. As I recall, that gauge was the first > thing I added, and it has definitely paid for itself many times over > just in terms of peace of mind. I looked at that, but decided to buy a $9 oil pressure tester on eBay. This is not a permanent, dash mounted gauge, just something you connect at the sender to get a reading of the pressure. We'll see what it says, then proceed from there. Allan -- 1991 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.