Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 4 Mar 2008 18:46:01 -0800
Reply-To:     B <oddstray@ODDSTRAY.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         B <oddstray@ODDSTRAY.COM>
Subject:      Re: Poptop Raise Assists
In-Reply-To:  <1ed6d210803040855g5e86b8b0yab51ed8b36374871@mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

Aaargh! I *need* this. But the forum that pops up from the link on craig's post only talks about a kit, but doesn't provide any info on how to order it ... ??? What am I missing?????

B(no-arm-strength)&S '87 Westy 'Esmerelda Blanc' SoCal

On Mar 4, 2008, at 8:55 AM, Doug Alcock wrote:

> Cool --- thanks for the tip --- I just ordered mine and as it turns > out the > guy just happened to be on his way to the Post Office --- so it's in > the > mail already!!! I'm excited. > > Cheers, > Doug > > > > On 3/4/08, craig cowan <phishman068@gmail.com> wrote: >> >> Someone on the samba has come up with a design and started >> producing kits. >> http://www.thesamba.com/vw/forum/viewtopic.php?t=267447 >> >> -Craig >> '85GL >> >> On Tue, Mar 4, 2008 at 6:57 AM, Joy Hecht <hecht.joy@gmail.com> >> wrote: >> >>> Yup, I know I'm replying to an email from more than a year ago! >>> But I'm >>> back to carrying a kayak, and thus back to being unable to lift my >> poptop. >>> Very inconvenient. So I'm looking at struts. >>> >>> Kim, why did you install them inside instead of outside? Is that >> cosmetic >>> or functional? And I can't tell from your photos where exactly >>> they are >>> mounted at the lower end. Are they attached to a metal plate that >>> is >> part >>> of the poptop hinge? >>> >>> If anyone else has tried this, I'd be interested in your >>> experience as >>> well. >>> >>> >>> >>> Joy >>> >>> **************************************************************** >>> Joy Hecht >>> and Matilda, 1989 Burgundy Vanagon >>> >>> For musings about life and the vanadventures: >>> http://www.joyhecht.net >>> >>> >>> >> ****************************************************************:::-----Orig >>> inal Message----- >>> :::From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On >> Behalf >>> :::Of Kim Brennan >>> :::Sent: Saturday, February 03, 2007 9:58 PM >>> :::To: vanagon@GERRY.VANAGON.COM >>> :::Subject: Re: Poptop Raise Assists >>> ::: >>> :::Though no one asked I feel a few other comments are in order >>> (I've >>> :::mentioned them before without the pictures. ) >>> ::: >>> :::It's a good idea to attach any struts to a strong point on the >>> :::poptop. In this case I already had a rack mount, which has a >>> :::reinforcing plate on the inside (invisible in the photos.) That >>> helps >>> :::spread the load of the lift. >>> ::: >>> :::On the lower mounting point, the place chosen was just about as >>> far >>> :::forward as I could make it (it doesn't look very far forward, and >>> :::there is a reason for that.) The gating factor here was the >>> existing >>> :::mechanism, which folds up and would occupy spaces further >>> forward. I >>> :::also needed to ensure that there was clearence between the gas >>> spring >>> :::(strut) and the existing mechanism. It was a tight fit using the >>> :::parts and mounting cups that I had. >>> ::: >>> :::When I initially set it up, I used 125 pound struts. These were >>> :::woefully inadequate and in fact I couldn't even tell if they were >>> :::installed. I believe I also had on hand 150 pound struts, but >>> again, >>> :::those simply weren't enough. The 250's were the highest rated I >>> could >>> :::get in this model. I wouldn't have minded something a little >>> bigger, >>> :::but them's the breaks. Just encourages me to pack light.... >>> ::: >>> :::Other folk have stated that they thought I would have mounted >>> them >>> :::the other way (with the lower mount point further forward). I >>> :::considered that. But I tried it this way, on the theory that if >>> it >>> :::didn't work, I could still switch to the other method with only >>> the >>> :::cost of a hole in the poptop hinge to show my work. As it turns >>> out >>> :::this was quite adequate, and I didn't pursue the other method. >>> ::: >>> :::On Feb 3, 2007, at 3:18 PM, Kim Brennan wrote: >>> ::: >>> :::> >>> :::> <http://homepage.mac.com/kimbrennan/PoptopAssist/index.html> >>> >> > > > > -- > http://www.dougalcock.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.