Date:         Wed, 5 Mar 2008 14:05:11 -0800
Reply-To:     Mark Drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Drillock <mdrillock@COX.NET>
Subject:      Re: Question about front heater core removal... blower motor wires
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <4d1b79350803051349u2c362ed1n1bd55239f770c5ae@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

The wires come from a connector plugged into the back of the heater fan
switch. There is also a brown ground wire running over to the main
ground stars where it can be unplugged. The power wire from the fuse
panel to the fan switch connector can be released from the connector
shell with a jewelers flat blade screwdriver.

Mark

Jim Felder wrote:
> I just now got to the point where I could lift the heater core of my 90
> clear of its mounts... except for one thing: the wires that power and
> control the heater motor.
> Is there a connector I am not seeing? Do most people just cut them and
> solder them back later?
>
> I read everything I could find on the list about removing the dash and
> heater, and because of that information it was a very quick job, no problems
> at all. Until these wires!
>
> Also, what is the tall silver electronic box that bracket to the crossmember
> behind the blove box and just to the right of the heater plenum? It has a
> bunch of wires going to it.
>
> Jim
>