Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 5 Mar 2008 15:36:08 -0800
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: Question about front heater core removal... blower motor wires
Comments: To: Mark Drillock <mdrillock@COX.NET>
In-Reply-To:  <47CF1917.4020103@cox.net>
Content-Type: text/plain; charset="us-ascii"

The silver box, Cruise control , control unit perhaps ?

( unless it's a an aux diesel heater control box, those are mounted there.)

yeah, the wires unplug from the back of the fan switch, except for that one brown ground wire.

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Mark Drillock Sent: Wednesday, March 05, 2008 2:05 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Question about front heater core removal... blower motor wires

The wires come from a connector plugged into the back of the heater fan switch. There is also a brown ground wire running over to the main ground stars where it can be unplugged. The power wire from the fuse panel to the fan switch connector can be released from the connector shell with a jewelers flat blade screwdriver.

Mark

Jim Felder wrote: > I just now got to the point where I could lift the heater core of my 90 > clear of its mounts... except for one thing: the wires that power and > control the heater motor. > Is there a connector I am not seeing? Do most people just cut them and > solder them back later? > > I read everything I could find on the list about removing the dash and > heater, and because of that information it was a very quick job, no problems > at all. Until these wires! > > Also, what is the tall silver electronic box that bracket to the crossmember > behind the blove box and just to the right of the heater plenum? It has a > bunch of wires going to it. > > Jim >

-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.4/1313 - Release Date: 3/5/2008 9:50 AM


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.