Date: Sat, 1 Mar 2008 16:06:41 -0500
Reply-To: Joe Federici <joefederici@EARTHLINK.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Joe Federici <joefederici@EARTHLINK.NET>
Subject: Re: Blinkers not working???
In-Reply-To: <c4e7c5f90803011226i7405d67bx351b2559417759f8@mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Ok just walked in from putting it back the dash pod together. The
problem didn't turn out to be a ground. I left a plug off the hazard
switch, the one next to the switch light. Once I plug in everything
worked fine. No ground issues.
JFF
On Mar 1, 2008, at 3:26 PM, neil N wrote:
IIRC, there may have been a ground wire I didn't put back on. OR a
little (brown?) wire to one of the switches on the cluster. Not sure
which one.
Me? Vague memory? Yes. 45 Soon? Yes.
Neil.
On Sat, Mar 1, 2008 at 12:11 PM, Joe Federici
<joefederici@earthlink.net> wrote:
> Well-
>
> I pulled the dash pod off and tried unplugging and plugging the main
> dash plug in and out a few times along with checking the grounds at
> the made star ground rings by the fuse box. Nothing is unplugged. I
> also tried wiggling various grounds again. The strange thing to me
> the hazards work fine. The green light blinks on and off.
>
> Pulling the dash I really only unplugged a few things, One of which
> is the plugs on the turn stalk and I'm going to try switching it out
> with another stalk I have. I realize a bad ground is most likely the
> problem but if anyone has any idea on the best way to track it down
> I'm all ears.
>
> thanks
>
> JFF
>
>
>
>
> On Mar 1, 2008, at 11:42 AM, Ken Wilford wrote:
>
> It is probably a loose or broken ground connection at one of the two
> star ground connectors that are behind the fuse panel. The other
> thing I would try is unplugging the instrument cluster and plugging
> that back in. Be sure the plug is straight. You should find the
> problem this way.
>
> Ken Wilford
> John 3:16
> www.vanagain.com
>
>
> Joe Federici wrote:
>> OK, so here the problem I pulled the dash off to replace the heater
>> motor. Put everything back to together and now my blinkers aren't
>> working properly.
>>
>> What I'm getting is dim green led that's on constant, if the flip the
>> stalk to use the blinker the green light get brighter not does not
>> blink. Everything else seems to work fine. The hazards to work.
>>
>> I check the connections on the steering column and they all seem to
>> be OK. I have cruise control on that same stalk and that works fine
>> as well.
>>
>> Anyone have a good starting point for tracking this down. I looked of
>> loose grounds or connections but I'm not seeing anything.
>>
>> thanks
>>
>> JFF
>>
>>
>> '87 Syncro Adventurewagen: Vincent Van-Go
>>
>>
>
--
Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/
|