This happens when the latch at the bottom of the table fails. Here's what I recall: you'll have to remove the table by taking off the two plastic bullets at the hinge at the top edge and remove the 10mm bolts that attach the table to metal frame at the wall. I don't remember if you can get to the latch by leaning the table out, if so, you're done when you buy another latch and install it. I hope somebody in the group has one, you won't like the price of a new one. I've done stuff to the table that required removing the whole thing, which required removing the plastic wall molding, which requires removing the rear seat. I hope that isn't the case with the latch. Jim On Fri, Mar 14, 2008 at 4:45 PM, John C... <Trvlr2001@comcast.net> wrote: > Hi All, > > Help! Cant get folding table to open !! :o) > > ( 91 Weekender ) ( OK, Multivan :o) > > I figure it's supposed to push in pull out.... > but Notta ! no work !!?? > > Any tricks out there? > > thanks ! > John C... > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.