Metal won't get stuck to what it's clamped against, but composite may. Which part is easier to remove and scrape a baked-on gasket off of? I'd put metal towards the head, for that reason alone............ Mike B. ----- Original Message ----- From: "Jim Felder" <jim.felder@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, March 20, 2008 8:18 PM Subject: Re: exhaust gasket question 2.1
> Thanks, all, as usual. Metal to the head it will be. > Jim > > On Thu, Mar 20, 2008 at 7:01 PM, Jake de Villiers < > crescentbeachguitar@gmail.com> wrote: > >> I've always put the metal side to the source of the heat whatever the >> make >> of engine but I remember a post not too long ago that espoused the >> opposite. >> >> In 35 years of hot rodding etc I've never had a problem when putting the >> metal side to the exhaust port. :) >> >> On Thu, Mar 20, 2008 at 4:44 PM, Jim Felder <jim.felder@gmail.com> wrote: >> >> > My first question is why does a Vanagon full gasket set come with only >> > two >> > head-to-pipe gaskets when it requires four? >> > My real question is which side goes toward the head, the composite side >> > or >> > the metal side? >> > >> > Obviously I'm talking about the kind that's thin steel bonded or >> > crimped >> > to >> > a composite material. >> > >> > Thanks, >> > >> > Jim >> > >> >> >> >> -- >> Jake >> 1984 Vanagon GL >> 1986 Westy Weekender "Dixie" >> Crescent Beach, BC >> www.crescentbeachguitar.com >> http://subyjake.googlepages.com/mydixiedarlin%27 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.