Date:         Wed, 19 Mar 2008 16:30:48 -0800
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: If you're bored.... Vanagon Engine Conversion Progress
              (welding pics)
Comments: To: pdooley <psdooley@verizon.net>
In-Reply-To:  <0JY00004344NZ681@vms173001.mailsrvcs.net>
Content-Type: text/plain; charset=ISO-8859-1

On 3/19/08, pdooley <psdooley@verizon.net> wrote:

> Well done Neil.

Wick-ed. --- :^)

Thanks.


> Your setup looks remarkably similar to mine.
> I hope it works well for you.


"remarkably similar" Yes. Hmmm...... I wonder how? --- ;^)

It should work fine.


> For those who think the WBX load bar is good starting point- I say bolt a I4
> VW motor in your van and hold the factory bar up there, then talk to me.
>
> Also, I have to disagree with the 220V camp.
> I can weld 1/4 inch steel all day long with my 120V Lincoln Electric MIG
> with adequate penetration.


Sadly the chart on my Hobart 140 doesn't include 1/4" when using gas.
But, I'm sure with a 45 degree grind and a couple of passes it would
do.


>
> And Neil- judging by the pictures, I think your welding skills are good
> enough now to properly secure your I4 in the van.


Thanks again. Really appreciate the help.

It'll hang nicely

Neil.



>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> neil N
> Sent: Tuesday, March 18, 2008 9:59 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: If you're bored.... Vanagon Engine Conversion Progress (welding
> pics)
>
> http://tubaneil.googlepages.com/passengersideenginecarrier
>
> Getting better!
>
> Neil.
>
>
>
> --
> Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
>
> http://web.mac.com/tubaneil
> http://tubaneil.googlepages.com/
>
>
--
Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/