Neil, Excellent!
How I corrected it. put carrier on with only DS mount installed, used a bottle jack to bring PS of engine up to get things level, measured level at tranny, (many, many times!) measured how large the gap was between PS bracket and carrier arm, (too large by 5/8") made up a piece of wood to go in place of PS mount, lowered the engine and checked level again. I added a piece of 2" box that is 5/8" tall. Or something like that --- :^) I'm pretty sure it's right now. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.