Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 27 Mar 2008 20:16:38 -0500
Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Sullivan <sandwichhead@GMAIL.COM>
Subject:      Re: Radio Install
In-Reply-To:  <BAY125-DAV5B934CAB753CE3DEEE693A0F90@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1

Dennis, i understand the first part of your answer, but the rest OMH(over my head):-) Red is the acc wire and connected. yellow is the memory and connected. Black is connected. AF harness is dual so fits both the OEM harness into one. All I had to do was get an adapter for the antenna. Just putting it out there. Michael.

On Thu, Mar 27, 2008 at 8:04 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> Are you supplying power to both the Red and Yellow wires? Is the black > wire connected to chassis? AFAIK this unit does not have provision for > vehicles with non switched accessory ignition switches so you will need to > switch the red wire or else expect a future dead battery. Also, don't rely > on the original wire to feed it. Get at least a 12 gauge so you don't have > to watch the face plate dim whenever it tries to make bass. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Michael Sullivan > Sent: Thursday, March 27, 2008 8:29 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Radio Install > > OK...Need a little advice. Bought a DUAL XDM6820 from JC Whitney and got > the > wiring harness #1784 and antenna adapter to install in 91GL. Harness fits > both OEM harnesses behind dash and antenna adapter w/amplifier fits, but > when I connect all wires as instructed...no sound or power on faceplate. > It > is a removeable faceplate and when I take it off there is a blinking red > light showing power is getting through. I pressed reset and no change. I > checked fuse #3 and all good. Placed a call to tech support but closed > till AM. Any ideas? All other items on fuse work(interior lights, vanity, > etc)Thanks, Michael. > BTW-No power antenna in 91GL? Right? > > -- > Michael in San Antonio > 91GL AT 'Gringo' > >

-- Michael in San Antonio 91GL AT 'Gringo'


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.