Date: Tue, 25 Mar 2008 15:42:02 -0700
Reply-To: neil N <musomuso@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: neil N <musomuso@GMAIL.COM>
Subject: Re: Was: Should engine mount move... Now: Viewing Image of Fox
mounts in ETKA
In-Reply-To: <71d9cdf90803251341teb3455at7948e09da5109ed8@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Yes Sir!
;^)
I can tell they know what they're talking about.
I'm just curious about the "how and why". Not contradicting. Hopefully
it's not taken that way, as email text can be SO misleading.
I wouldn't want to "bite the hand(s) that feed". I really need and
appreciate this info!
Neil.
On Tue, Mar 25, 2008 at 1:41 PM, Jake de Villiers
<crescentbeachguitar@gmail.com> wrote:
> Just do as you're told! Mike and Mark both KNOW what they're talking about.
> :)
>
>
>
> On Tue, Mar 25, 2008 at 12:26 PM, neil N <musomuso@gmail.com> wrote:
>
> > Interesting. Very interesting.
> >
> > Being such a newb to all this, I'm not sure what to do, as you, also,
> > have made a good point.
> >
> > Is "steering feedback" the same as, or part of, the torque steering
> > that the older mid '70's Hondas were famous for? i.e. accelerate and
> > get pulled slightly left (or right?) Regardless.....
> >
> > The good news is that I can change the way they're mounted quite
> > easily after this conversion is done.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On 3/25/08, Mark Drillock <mdrillock@cox.net> wrote:
> > > Neil, the way you oriented your mounts was in fact correct as far as the
> > > Fox orientation was done. The Fox subframe has contoured mounting
> > > platforms for those rubber mounts that only allow them to be oriented
> > > the way you did them.
> > >
> > > I still think you should turn them 90 degrees now though because the way
> > > the FOX had them was I think a reflection of the fact that it had a
> > > front wheel drive, to reduce steering feedback.
> > >
> > > Mark
> > >
> > > neil N wrote:
> > > > This is for a Jetta 2.0 engine with Fox mounts and brackets in my
> Vanagon.
> > > >
> > > > So, ok.
> > > >
> > > > In ETKA I'm viewing:
> > > >
> > > > '89 Fox "MG": 1 "SG": 99 "Illustration Stock": 199-00. The Fox
> > > > mounts look like they're mounted at 90 degree's to engine crank.
> > > >
> > > > ?
> > > >
> > > > I'm looking at a small image of this.
> > > >
> > > > IF I'm seeing it correctly, then the mount appears to be designed to
> > > > handle fore/aft movement when power applied to wheels. Not side to
> > > > side movement.
> > > >
> > > > Not taking issue with anyones helpful opinions, just curious and want
> > > > to set it up as close to "stock" as possible.
> > > >
> > > > If this isn't too misguided on my part! --- :^)
> > > >
> > > > Neil.
> > > >
> > > > --
> > > > Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
> > > >
> > > > http://web.mac.com/tubaneil
> > > > http://tubaneil.googlepages.com/
> > > >
> > >
> > --
> > Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
> > http://web.mac.com/tubaneil
> > http://tubaneil.googlepages.com/
> >
>
>
>
> --
> Jake
> 1984 Vanagon GL
> 1986 Westy Weekender "Dixie"
> Crescent Beach, BC
> www.crescentbeachguitar.com
> http://subyjake.googlepages.com/mydixiedarlin%27
--
Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/
|