Date:         Mon, 31 Mar 2008 14:18:32 -0400
Reply-To:     Michael Vickey <vickrail@VELOCITY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Vickey <vickrail@VELOCITY.NET>
Subject:      Re: Syncro temp gauge
Comments: To: Tom Myers <motmyers@HOTMAIL.COM>

Tom,

Most likely there is corrosion on the spade terminal or connector for the
temp sensor wire. Location is just forward of the thermostat housing and is
a single-wire on the Syncro. The wire could also be broken.

Check that wire and connection first.

Michael J

87 Syncro parts van (for sale)
88 DoKa 2wd 6-seater
89 Syncro DoKa Jagdwagen
90 Syncro Camper
99 Eurovan GLS
06 Sprinter/Winnebago View

http://www.velocity.net/~vickrail/moshevw.htm

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.