Date:         Sat, 29 Mar 2008 18:04:16 -0700
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: brake parts quality question
Comments: To: Mark Drillock <mdrillock@COX.NET>
In-Reply-To:  <47EEF1AC.7080909@cox.net>
Content-Type: text/plain; charset="us-ascii"

First thing that pops into my mind is ..........was the o-ring that seals
vacuum at the forward end of the MC in place ?

Never heard of such a brand in anything, never mind a vanagon MC.

Question for you or anyone :
High performance vanagon front brake pads - know of any ? semi-metallics,
etc ?
Thnx,
Scott

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Mark Drillock
Sent: Saturday, March 29, 2008 6:50 PM
To: vanagon@GERRY.VANAGON.COM
Subject: brake parts quality question

A relative of mine several months ago installed a new brake master
cylinder in his  Vanagon. It was a Bietrix brand, whatever that is.
Since then he has complained about the brakes not always working well
and recently stopped driving it because it did not feel safe to him.
Today I visited him and we looked at his problem. Every push on the
brake pedal made a strange noise that sounded like air rushing. The
pedal went most of the way to the floor. Holding it down while starting
the engine had no affect.

I brought along a used pedal cluster with booster and he installed the
used master cylinder from that assembly. The noise stopped and the pedal
was much higher with a firmer feel. Holding the pedal down while
starting the engine resulted in the pedal moving farther as brake system
vacuum built up. All was good, test drove fine.

Has anyone here used that brand of master cylinder? How did it work out?

thanks,
Mark


--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.1/1348 - Release Date: 3/28/2008
10:58 AM