Try rocking your emergency flasher switch firmly back and forth about 20 times. If that does not fix it, remove and reconnect the wiring plug on the back of it. If that does not fix it get another switch. Mark
Matthew Snook wrote: > OK, so I finally replaced the relay with a new model, and now have turn > signals again. All turn signal lights function as appropriate. But when > the emergency flasher switch is thrown, only the lights on the right begin > blinking. The left is dead. Are the left and right sides on separate > fuses? I'm hoping it's something simple like that. Just looking for ideas > before I inspect each and every fuse. :) > > Matt > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.