If the outlet is on the left wall just in front of the rear seat (mounted low) and looks like a household outlet it is probably the factory setup. The "switch" adjacent to it on a separate wall plate is supposed to be a 110v circuit breaker. The factory setup: The 110v outlet has no power unless you are hooked up to shore power. The circuit breaker may be broken, sometimes you need a pencil head or similar to press in the reset button. However, if a previous owner modified things who knows what you have. Best to get a cheap mulitmeter and as others have suggested, poke around and measure voltages. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.