Of course that's the _first_ thing I did! - top off the blinker fluid. After that I checked the lights. All corners working, but use of the signal lever just gives a continuous light both outside and on the LED on the dash. No blinking anywhere. When all is quiet, I can hear the unit click when I first move the lever, then another click just after it's returned to center and the LED goes out. I just figured it to be the relay or whatever. Are there other parts that can malfunction to cause the same result? It really bugs me 'cause it bugs me when others don't let _me_ know what's going on by using their blinkers. I don't want to be one of _those_ folks... Thanks, Matt :) ________________________________________ From: JordanVw@aol.com [mailto:JordanVw@aol.com] Subject: Re: parts source? check your blinker fluid, it may be low. seriously, you need to be alittle more specific...is a bulb burned out? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.