Date:         Mon, 7 Apr 2008 15:19:10 -0500
Reply-To:     Ben Cichowski <aquasheck@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben Cichowski <aquasheck@HOTMAIL.COM>
Subject:      Re: Install metal donut or gasket between pipe and cat inlet on
              Vanagon exhaust?
Comments: To: neil N <musomuso@gmail.com>
In-Reply-To:  <c4e7c5f90804071231j4fa973d4jd7be062070f9c73e@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Neil,

If you have a cove on both sides to accept the donut - then use it. It will outlast those exhaust gaskets.
If you only have a cove on the inlet of the CAT, and not on the mating flange of the manifold, then I think you'll need to go with a gasket.

-Ben

> Date: Mon, 7 Apr 2008 12:31:18 -0700
> From: musomuso@GMAIL.COM
> Subject: Install metal donut or gasket between pipe and cat inlet on              Vanagon exhaust?
> To: vanagon@GERRY.VANAGON.COM
> 
> Hi all.
> 
> I bought an aftermarket cat. (for the 2.1) Pic of it plus parts that
> came with it:
> 
> http://tubaneil.googlepages.com/catparts
> 
> Bentley only shows a gasket, but since there is a bevel on inlet of cat.....
> 
> Possibly silly question, but do I use the metal donut or just the gasket?
> 
> Thanks!
> 
> New Attitude Neil.
> 
> 
> 
> 
> 
> --
> Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
> 
> http://web.mac.com/tubaneil
> http://tubaneil.googlepages.com/

_________________________________________________________________
More immediate than e-mail? Get instant access with Windows Live Messenger.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_instantaccess_042008