So I took the rear Z-bed out of my 1990 L to fit a large cabinet in the back for transport. I had installed the seat when I got the van, but the seat is from an 85. I bolted the static end of the shoulder belts in with the rear bolts of the seat when I installed it originally, but tonight upon reassembly when I did the same thing it didn't seem right. the seat wouldn't latch back to the studs correctly. There are two other threaded holes just aft of the larger threaded holes for the seat. does the static end of the belt bolt in with the seat? or right behind and slightly above it with a smaller bolt? I don't see it in Bentley. thanks Harry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.