On Wed, Apr 16, 2008 at 2:28 PM, Scott Daniel - Shazam <scottdaniel@turbovans.com> wrote: > > > If you are talking about a Remote Starter switch for initial cranking and > firing up - *imperative* to do it that way in my world, so you can be right > by the engine while it's cranking.
Yah I got myself a honking brass push button switch to install in engine bay for remote starting.
> > Doesn't matter too much if fp runs during cranking or not. > Often you can't hear the fp running in that phase due to starter noise. > As long as there is fuel pressure....and all the other stuff at the right > time, it should fire and run. > > Fire that mutha up !
I'm "on it" ! :^) Neil.
Neil wrote: > I'll also be making up a push button (temp "on") for starter, so that > will help a lot with trouble shooting. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.