Date:         Sun, 20 Apr 2008 10:30:42 -0700
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: Power supply, Pump, Potable water
Comments: To: Neil2 <vidublu@gmail.com>
In-Reply-To:  <5a099d980804191604o326f3fa7i832c3b826d65fc36@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

In Bentley all #16 wire:

yellow from 6 contact connector "on indicator light panel",  to 2
contact connector "next to" water pump, to 3 amp fuse, red to water
pump motor.

Ground (black) from 6 contact connector "on indicator light panel" to
2 contact connector "below sink", to water pump switch, green to 2
contact connector "below sink", black to 2 contact connector "next to
water pump", and black to water pump.

The Bentley has a seperate section for camper wiring. Really handy!

Also, on my '81 Westy, I found that installing a foot operated switch
at RH side (corner almost) of cabinet, really handy. IIRC, I used a
generic "horn" button from my FLAPS. Just wire it in place of the
dinky problematic switch at faucet. I never used "city" setting, so
was pretty easy to do. Beware that PO could have used different colour
wire, though it sounds like you have stock colours there.

Cheers,

Neil.

On Sat, Apr 19, 2008 at 4:04 PM, Neil2 <vidublu@gmail.com> wrote:
> Below the sink in my 81.5 Westy there are two leads (black &
>  yellow) connected to the water pump.  They're not supplying any power
>  presently.  Does anyone have any idea where they run?
>
>
>
>  --
>  Neil
>  '82 Diesel Westy
>  Me other car is Swedish
>



--
Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"

http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/