Date:         Sun, 20 Apr 2008 19:52:07 -0700
Reply-To:     Slloth <slloth@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Slloth <slloth@COMCAST.NET>
Subject:      Re: Fuel lines (injector hoses)
In-Reply-To:  <004201c8a354$f97e1830$0101a8c0@gpa207joel>
Content-Type: text/plain; charset=windows-1252; format=flowed

When replacing the small 2 inch lines on the injectors how do you remove
the hose from the injector?  It has a small metal washer looking thing
that seems to be crimped to the injector.

I read instructions on replacing the lines and they said to use WD40 to
help if the new line won't slide through the old heat sleeve.  Do
solvents like WD40 dry out rubber quicker?  Or am I looking to far in to
this.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.