Date:         Wed, 16 Apr 2008 07:17:42 -0700
Reply-To:     Paul Guzyk <paullist08@GUZYK.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Paul Guzyk <paullist08@GUZYK.COM>
Subject:      Re: Extend-A-Stay valve
In-Reply-To:  <022101c89fc9$5dfdb4d0$6701050a@cspfr2>
Content-Type: text/plain; charset="us-ascii" ; format="flowed"

Remove the original copper lines from inside the Westy cabinet and
disconnect from fridge/stove.

Buy new copper tubing along with fittings from home depot.  (the
propane system uses North American standards, not metric).

Use a flare tool and pipe bending tool to make new lines that route
the way you need them to.  Buy extra tubing since it may take a try
or two to shape them the way you want.  Don't forget to slide the
fitting on before you make the flare!  (BTDT!)

Use soapy bubble solution to check for leaks when everything is put
back together.  Home Depot even sells heavy duty industrial soapy
bubble solution near their 1" black gas pipes, but kids bubble soap
will work too.

Some list members have used pre-made flexible (rubber??) gas hoses to
replace the copper lines.   I'm not sure how appropriate flexible
lines are in a Vanagon...

>The issue is my propane lines already look as
>if they are stretched to their limit with what may be a longer than original
>regulator. I'm really worried about pushing the lines over another 2 inches,
>it looks like they'll kink up.  Any suggestions?
>