Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 24 Apr 2008 11:07:47 -0700
Reply-To:     Mark Drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Drillock <mdrillock@COX.NET>
Subject:      Re: 86 hot temp gauge---was  '86 Westy cranking trouble
Comments: To: Dan Hall <elektro@WESTAL.NET>
In-Reply-To:  <E6E0FAE1-61AA-49B2-8EF7-EA7E6B81FDB8@WESTAL.NET>
Content-Type: text/plain; charset=windows-1252; format=flowed

That brown is always ground. The voltage comes from the yellow/red wire and the gauge. The gauge measures current flow through the wire and sensor. As the sensor heats up it's resistance drops and more current flows through it and the wire, so the needle moves higher on the gauge.

Mark

Dan Hall wrote: > I"ve on the van since 1993. In all that time, the temp gauge, after > warming up would settle in around the center of the LED during highway > driving. Some thermostats would run a needle width warmer, some a > needle with cooler. > The current situation has the needle 2-3 needle widths past center of > LED, almost to where the radiator fan would kick in. I"ve never seen > that before. > > Will endeavor to get a true temp reading. > > The coolant temp sender has two wires. I red/yellow and a brown. On > page 97.92 fo Bentley the red/yellow goes to D29 connector on the > fuse/relay panel. The brown connects into the brown wire going to the > license plate lite on current track 96, page 97.94 of the Bentley. > > Can someone tell me how the coolant temp sender operates? Is it > actually getting 12 volts off the license plate circuit and the > red/yellow wire sends what voltage it gets through the sensor to the gauge? > Or is brown wire always a ground? And the the gauge is reading > continuity to ground? > > Please forgive my ignorance on the operation of these electrical gizmos. > > Dan > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.