At 10:27 AM 4/30/2008, Chris S wrote... >Although I'm getting ZERO messages from Gerry again, I'm hoping >knowledgeable folks will reply to me directly. > >I'm confused about proper lifter adjustment. According to Bob Boston >I >should do 1.5 turns past contact. According to Ken Wilfy I should >just >leave the lifters set at first contact. > >Sooo... what is it? And why? 1 1/2 turns in from a fully expanded lifter. Because it allows the lifter to adjust itself in either direction. If you set it at "first contact," the lifter can't expand to adjust for a valvetrain which is getting looser. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.