pickle vanagon wrote: > After putting everything back together after my head-job gone wild, > everything is great except that the temperature gauge reads warmer than > before (yes I bled the system). Before it sat just on the right edge of the > LED. Now it sits 3/4 of the way up the gauge, a full half way between the > LED and the far right side. I would expect to see higher readings on the gauge (and higher actual temperatures) after honing the cylinders and installing new rings due to the friction. You'll likely see cooler temperatures after the break in period even if the readings aren't the same as your old sender would have provided. Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.