Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (May 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 5 May 2008 10:39:01 -0400
Reply-To:     "Eastman, Cecil @ ELM" <Eastman.C@ATWOODMOBILE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Eastman, Cecil @ ELM" <Eastman.C@ATWOODMOBILE.COM>
Subject:      Re: Great gas mileage, crappy breaks.
Content-Type: text/plain

You're definitely looking at a hydraulic issue, but it may not be the master cylinder. Look at the brake fluid level first. If that's normal, it may indeed be the MC, as fluid may be flowing past the piston seals. My experience has been that an external leak is more likely the culprit. Check for fluid around the front calipers, or remove the rear drums and see how the slave cylinders are doing.

Regarding DIY, it all depends if you're comfortable with dismantling your dashboard, if it is the Master.

Another note, from personal experience: immediately, IMMEDIATELY, wipe up any drop of brake fluid off of the plastic. The fluid will silently eat through your dashboard if left unattended. That's what it did to mine.

Cecil

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of BJ Feddish Sent: Monday, May 05, 2008 10:07 AM To: vanagon@GERRY.VANAGON.COM Subject: Great gas mileage, crappy breaks.

I went to GGB4 over the past weekend. I was happy that I got 21 MPG round trip and that included plenty of mountain climbing in 2nd and brake fade on the way down.

Anyway, 1 mile from my house yesterday I almost rear ended a pickup truck as my brake pedal went all the way to the floor. Pumping did not help. My pads and shoes are less than a year old and the system was bled a month ago. I left a message at my mechanics to fix this but is this most likely the master cylinder on it's way out? Should I pick one up at Bus Depot before bringing the van over? Is this something I can replace myself?

Thanks, Bryan


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.