Date:         Mon, 5 May 2008 13:58:54 -0400
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Re: Elemental Mods Report
Comments: To: Michael Diehr <md03@XOCHI.COM>
In-Reply-To:  <C7642D9B-F631-41A9-9A93-8338D0B380F0@xochi.com>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Michael Diehr wrote:
> So there's an over-temperature cutout, but there is no over-pressure
> cutout?  I have a vague memory of someone saying there was an over-
> pressure cutout on the AC system...?

The "Overpressure" cut-outs are to be found on the "Factory" installed
AC systems.  The systems found on models through '85 (and some '86s)
were dealer or port of entry installations and don't have them (unless a
PO had one installed).

Mike

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.