Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 5 May 2008 20:27:46 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Upper Control Arm, hex key size
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <001a01c8af26$1fa90dd0$0601a8c0@DADSTOSHIBA>
Content-Type: text/plain; charset=ISO-8859-1

No hoses on either side. No A/C on the '84.

Breaker and allen socket in one end, ratchet and socket on the other - pretty zippy.

On Mon, May 5, 2008 at 8:06 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> Do you have AC hoses in the way? Tight fit. The allen key does fine as you > only have to hold and position the bolt. > > > > Dennis > > > > -----Original Message----- > From: Jake de Villiers [mailto:crescentbeachguitar@gmail.com] > Sent: Monday, May 05, 2008 8:57 PM > To: Dennis Haynes > Cc: vanagon@gerry.vanagon.com > Subject: Re: Upper Control Arm, hex key size > > > > I have a 1/2" drive socket bit that fits if I use my breaker bar not a > ratchet. > > On Mon, May 5, 2008 at 8:30 AM, Dennis Haynes <d23haynes57@hotmail.com> > wrote: > > 14MM or if desparate, 9/16". Not enough room for a socket bit, just get a > short l-handle. > > Dennis > > > > From: Joel VanderKwaak <joelvanderkwaak@GMAIL.COM> > Reply-To: Joel VanderKwaak <joelvanderkwaak@GMAIL.COM> > To: vanagon@GERRY.VANAGON.COM > Subject: Upper Control Arm, hex key size > Date: Sun, 4 May 2008 23:22:34 -0700 > > > > Howdy, > > Can someone tell me what size hex key is needed to remove the upper > control arm? It's bigger than 12mm and 1/2 inch, and smaller than 17mm > ;) And it appears I'll have to order it online as none of the local > shops seem to stalk that size range. > > Thanks, > > Joel > > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > Crescent Beach, BC > www.crescentbeachguitar.com > http://subyjake.googlepages.com/mydixiedarlin%27 >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.