Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 5 May 2008 23:43:18 -0700
Reply-To:     Zoran Mladen <zmaninco@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zoran Mladen <zmaninco@YAHOO.COM>
Subject:      Re: Upper Control Arm, hex key size
Comments: To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Content-Type: text/plain; charset=iso-8859-1

There is just enough room to get a 3/8" allen socket in there on a ratchet.  The 1/2" drive socket is too large. ----- Original Message ---- From: Dennis Haynes <d23haynes57@HOTMAIL.COM> To: vanagon@GERRY.VANAGON.COM Sent: Monday, May 5, 2008 11:30:48 AM Subject: Re: Upper Control Arm, hex key size 14MM or if desparate, 9/16". Not enough room for a socket bit, just get a short l-handle. Dennis >From: Joel VanderKwaak <joelvanderkwaak@GMAIL.COM> >Reply-To: Joel VanderKwaak <joelvanderkwaak@GMAIL.COM> >To: vanagon@GERRY.VANAGON.COM >Subject: Upper Control Arm, hex key size >Date: Sun, 4 May 2008 23:22:34 -0700 > >Howdy, > >Can someone tell me what size hex key is needed to remove the upper >control arm? It's bigger than 12mm and 1/2 inch, and smaller than 17mm >;) And it appears I'll have to order it online as none of the local >shops seem to stalk that size range. > >Thanks, > >Joel ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.