On Thu, 8 May 2008 08:20:40 -0700, Aaron <a.robinson.lists@GMAIL.COM> wrote: "On the front shocks there was a metal "washer" that was around 3/8" thick that fit on the shaft. When installing the shocks, this piece wouldn't fit up into the shock protector that was in there, so I left it out. Was there a reason for the part and did I do it improperly?" I also installed sans the spacer. I queeried the list at the time and several folks confirmed they also installed the shocks without this spacer. No problems so far. jake 82 westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.