I've done what Mike has written and no ill effects at all. Except that my O2 monitor always bounces back and forth off the scale. Todd
-------------- Original message ---------------------- From: Mike Collum <collum@VERIZON.NET> > pickle vanagon wrote: > > I'm planning on running a wire from my oxygen sensor up to the front of the > > van for a air/fuel mixture gauge (i.e., voltmeter). > > Only part of that O2 sensor wire is shielded. The black wire from the > sensor itself, up to the spade connector, isn't shielded. The green > wire, from the spade connector to the ECU, is shielded. I've known > others who have run an unshielded wire, from that spade connector, > forward to a meter without problems. In fact, I'm getting ready to run > an unshielded wire forward to connect to my "Ken Lewis" LED O2 monitor. > > Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.