Scott, You really ought to try Kroil!!! I maintain that the best thing to do with the replacement tin is to not attach it at the exhaust. Bolt it to the crankcase and wire tie the exhaust end to something above. Walt Scott Daniel - Shazam wrote: >Well it depends if you are dealing with a nut on a stud ( very easy to deal >with relatively speaking ) >Or a bolt threaded into the head. > >They go in a long way too, like 1.5 inches, even more. >Stock, the start out with studs and nuts on one end of the head, bolts on >the other. >First, the BEST penetrating oil, bar none is called PB Blaster. >Penetrating catalyst, >Nothing else even comes close. >It is twice as good as Gunk's liquid wrench say. > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.