The ideal would be one large piece of smoothy shaped fiberglass, particularily in the middle area. But sure, anything with mounted metal panels you can fab, .......would be some improvement, I'll guessitmate 3 % . Also, front air dam.........to reduce flow under the van - that has possibilities. So would an extensioin off the back of the box shape . See that pointy thing off the back of an Adventurewagen top. - that increases direction stability by moving the center of side pressur aft, so there is an arrow affect . also, on any box, filling in the flat rear with either body or at least side and top fairings........helps. there are racing sailboats whose stern is practically open.......but there are extentions to the hull 2 or 3 feet long. and the smooth overall shape, 0f the Adveturewagon roof is is CONSIDERABL better in terms of roof drag than a westy. The westy roof and front roof rack sucks, big time in terms or turbulence and drag. ( I have an AW , not ready yet, FS btw - darn clean no dents no rust 85 ) I have faired over my 85 wolfsburg weekender roof rack - faired it over smooth. .5 % improvement maybe. I have a whole plan for fiberglass westy aero roof system. But yes, smoothing the bottom of Vanagon could have a small affect. Going 75, unless downhill, or with a strong tailwind, Is just burning up fuel unessarily, and very rough on the vanagon. I figured it out - the whole concept was conceived in the late 70's. The national speed limit at the time had been 55 mph. The first 3 years of vanagons had that flagged on their speedo. So really.........it is a 60 to 65 mph sporty, not quite truck, van. Damn good vehicle overall.........but 75 cruiser - they ain't Baby ! Scott www.turbovans.com -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Chris S Sent: Friday, May 16, 2008 6:02 AM To: vanagon@GERRY.VANAGON.COM Subject: Belly Pans for speed or MPG Has anyone ever fitted full belly pans under their Vanagon for increased aerodynamic efficiency? There's a lot under there that snags airflow and causes unnecessary drag. I'm contemplating installing galvanized sheets under the van and some in front. With 82hp every bit helps while going 75 mph. Here are pics of the underside to help visualize: http://i16.photobucket.com/albums/b7/misterpolak/Hershey/25.jpg http://i16.photobucket.com/albums/b7/misterpolak/Hershey/26.jpg
Any engineering thoughts? How would you do it? Chris S.
-- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.16/1446 - Release Date: 5/16/2008 7:42 AM |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.