Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2008, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 20 May 2008 14:40:31 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Skylight installation
Comments: To: pyjme@aol.com
In-Reply-To:  <8CA88D4404F95AA-99C-2AE4@WEBMAIL-MB16.sysops.aol.com>
Content-Type: text/plain; charset=ISO-8859-1

As measured from below, the hole is 11 7/16" fore and aft x 15 5/16" side to side.

The hatch overlaps the sides of the 'bump' to which its fastened. Let me know if you need pix or anything.

On Tue, May 20, 2008 at 2:04 PM, <pyjme@aol.com> wrote:

> Thanks Jake! > > Peter > > > -----Original Message----- > From: Jake de Villiers <crescentbeachguitar@gmail.com> > To: pyjme@aol.com > Cc: vanagon@gerry.vanagon.com > Sent: Tue, 20 May 2008 9:30 am > Subject: Re: Skylight installation > > Hey Peter, I'll open the hatch on Dixie and measure the hole for you as > soon as the downpour stops. > > There's a veritable LAKE surrounding the house right now! I feel like > Winnie the Pooh...... > > On Mon, May 19, 2008 at 7:31 PM, Peter Young <pyjme@aol.com> wrote: > >> I know this is probably in the archives, but I can't get the search to >> work (keeps timing out) and I need some info >> on installing a skylight as I am doing a retrofit into my '81 westy. I >> bought the kit from bus depot and it didn't come >> with assembly instructions - not too much of an issue because it looks >> pretty simple. My issue is: where do I put >> the rubber seal it came with (on the dome or on the van?) and how much do >> I cut out of the skylight location. It would >> be nice if the kit came with a template for the opening and bolt holes and >> included directions on the best way to cut >> the hole. I would like to tackle this as soon as the weather is nice again >> in a couple of days. Any pictures anyone >> has of the process would be greatly appreciated, and measurements of the >> opening. I got a couple of pictures from >> online of installed skylights, but they don't tell me much about how big >> the hole is or if it is shaped any differently than >> a big square (I assume it's not). Thanks for any help! >> >> Peter >> > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > Crescent Beach, BC > www.crescentbeachguitar.com > http://subyjake.googlepages.com/mydixiedarlin%27 > ------------------------------ > Plan your next roadtrip with MapQuest.com<http://www.mapquest.com/?ncid=mpqmap00030000000004>: > America's #1 Mapping Site. >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.