Date:         Thu, 22 May 2008 09:49:15 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Gauge sender question
Comments: To: Mike S <mikes@flatsurface.com>
In-Reply-To:  <20080522155755.7AEA21165C3@hamburg.alientech.net>
Content-Type: text/plain; charset=ISO-8859-1

Thanks Mike!  You'd think they could just give the resistance values to make
things easier for everybody............

On Thu, May 22, 2008 at 8:57 AM, Mike S <mikes@flatsurface.com> wrote:

> At 08:11 AM 5/22/2008, Mark Thoma wrote...
>
>> One of the things I desperately need to know is the resistance across
>>  the fuel level sender when the tank is 'full' and 'empty'.... the
>> manual doesn't mention it  anywhere.
>>
>
> Actually, the manual mentions it in the section on checking fuel gauge.
> A setting on the VW 1301 tester of 55 should be full, and of 560 should
> be empty.
>
> Now, for the first time anywhere, I will reveal the super-secret
> formula for converting the VW 1301 tester setting to ohms (I'm serious,
> try to find this anywhere else).
>
> It is N/2+10.
>
> So, full is (55/2+10=) 37.5 Ohms and empty is (560/2+10)= 290 Ohms.
>
> Enjoy.
>



--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
Crescent Beach, BC
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27