Date:         Thu, 22 May 2008 15:17:28 EDT
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: Full Length rear seat latching
Comments: To: magikvw@GMAIL.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 5/21/08 1:28:00 PM Eastern Daylight Time,
magikvw@GMAIL.COM writes:


> Ok folks I have a question. I'll try not to be vague.
>
> I have a full length rear seat that folds into a bed - it's not original to
> my bus. I don't have the proper "posts" for the latching mechanisim for the
> back part when the seat is upright so the back doesn't latch into place.
> This for obvious reasons is not safe. The seat has the metal handle in the
> middle of the backside that you pull to release it so you can fold it down.
>
> I guess my question is does anyone know where (or happen to have) I can get
> the proper posts so I can latch the thing?
>
>

if you have a carat and you put the regular 7 pass GL weekender sofabed in
there then the seatback wont latch properly because the carats have a extra
spacer welded to the latch points on the sides of the van because the carat
sofabed was narrower

chris


**************
Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
      (http://food.aol.com/tyler-florence?video=4&amp;
?NCID=aolfod00030000000002)