Date:         Thu, 29 May 2008 12:52:39 -0600
Reply-To:     David Hines <subyvanagon@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Hines <subyvanagon@HOTMAIL.COM>
Subject:      Oil leak between dipstick and oil pump cover
Content-Type: text/plain; charset="Windows-1252"

I have an 87' syncro that is leaking oil bewteen where the dipstick goes into the case and the upper right corner of the oil pump cover.  It looks like there is a bore plug there and the oil is leaking from it.  I have seen this mentioned in other posts but no solution.  I am thinking about using JB weld to seal it up any other suggestions?
 
 
See pic at: http://www.flickr.com/photos/subyvanagon/2534615780/in/set-72157605325841607/
_________________________________________________________________
Change the world with e-mail. Join the i’m Initiative from Microsoft.
http://im.live.com/Messenger/IM/Join/Default.aspx?source=EML_WL_ChangeWorld

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.