I took a piece of roofing membrane, EPDM I think they call it, but Home Depot also sells similar stuff for lining shower stalls prior to pouring concrete. Of course an old inner tube would probably work fine too. Any refrigerator is going to require ventilation for proper cooling, dissipating that heat is key. The standard vent on the left side of the cabinet, along with a built-in fan on the fridge should be adequate though. Troy <<I just got a 12V Isotherm fridge (nearly identical to the Vitrifrigo) and I'm wondering if they need any sort of venting --- like the Dometic --- or will the vent on the back of the fridge/stove cabinet suffice? Also - if you don't need the old external vent anymore, what have 12V fridge owners done about the vent hole in the side of the van? Jeff / San Anselmo>> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.