Date:         Sun, 1 Jun 2008 16:12:48 -0600
Reply-To:     Paul Connelly <vanagonhummingbird@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Paul Connelly <vanagonhummingbird@GMAIL.COM>
Subject:      Re: Wheel Well Trim Thingy...SYNCRO ONLY SPLASHGUARDS
Comments: To: JordanVw@aol.com, insyncro@yahoo.com
In-Reply-To:  <d5e.2d8bb7cb.35743936@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

Hey Chris/Dylan,

Thanks for the info.

I think I'll try drilling the "Splash Guards" out, and potting some bolts in
there with epoxy/Quick Steel/JB Weld and re fixing the existing one. I just
can't justify paying $100 for a 20 year old plastic trim piece that probably
is in no better shape than mine was.

Thanks Again,

Cheers, Paul.
1986 Syncro Westy - Hummingbird


On Sun, Jun 1, 2008 at 11:41 AM, <JordanVw@aol.com> wrote:

> In a message dated 6/1/08 1:15:22 PM Eastern Daylight Time,
> vanagonhummingbird@GMAIL.COM writes:
>
>
>
> Anyone know where to source PN 251 821 812B?
>
> Its the trim piece that sits behind each wheel well, that attaches with 3
> off 7 mm nuts onto embedded "butterfly" bolts in the plastic/rubber...
>
> May be a "wheel well flare!" My right rear is no longer attached.
>
> Don't see it on any of the usual list vendors sites. Anyone have a "spare"?
>
> TIA
>
> Cheers, Paul.
> 1986 Syncro Westy - Hummingbird
>
>
>
> those are syncro only splashguards, and theyre no longer available.
> your only option is to repair yours..
>
> chris
>
>
> **************
> Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence"
> on AOL Food.
> (http://food.aol.com/tyler-florence?video=4&?NCID=aolfod00030000000002)