Date:         Sun, 1 Jun 2008 18:20:40 -0700
Reply-To:     dylan friedman <insyncro@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         dylan friedman <insyncro@YAHOO.COM>
Subject:      Re: duct tape sticky residue removed
Content-Type: text/plain; charset=us-ascii

Sherwin Williams product:

Shur Will Clean, or something like that.
it is the first step i used after sanding a car before paint.
This stuff removes just about anything except paint and clear coat.
it leaves a haze so you can see it is there.
When removing stickers and such, spray it on, wipe with clean rag, terry cloth is best. repeat as needed and always keep using a clean section of rag.

Let dry to haze, little bit of rubbing compound, wax and buff.

dylan

----- Original Message ----
From: Cullen Stewart <cullberly@VERMONTEL.NET>
To: vanagon@GERRY.VANAGON.COM
Sent: Sunday, June 1, 2008 8:58:21 PM
Subject: Re: duct tape sticky residue removed

Goo Gone works well also Oops and I have had luck with mineral oil.
----- Original Message -----
From: "miguel pacheco" <mundopacheco@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, June 01, 2008 7:11 PM
Subject: Re: duct tape sticky residue removed


> I've used 'Goo Gone' for this and other similar challenges, and it
> worked fine. Bet some of the codgers on this list have other, more
> creative and unusual suggestions, though.
>
>
> Gracias,
> Miguel