Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2008, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 8 Jun 2008 10:53:30 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Brown paint for interior plastic parts
Comments: To: Robert Stewart <robertmstewart@mac.com>
In-Reply-To:  <0F339DB8-53CA-4691-8947-B419FE76C4BA@mac.com>
Content-Type: text/plain; charset=ISO-8859-1

Cool stuff but they only show modern interior colours - nohing really brown at all....

On Sun, Jun 8, 2008 at 10:13 AM, Robert Stewart <robertmstewart@mac.com> wrote:

> Check out SEM as they make spray paints in cans just for car interiors. > > http://www.sem.ws/ > > > http://semproducts.com/Catalog.asp?cat=36 > (Check out the Color coat chip chart)* > -- > Rob > NYC/Bloomingburg NY > 88 Wolfsburg, Silver > 236,000 miles - automatic > AIM: rmstewart@mac.com > > > > > > > On Jun 7, 2008, at 3:35 PM, Malcolm Stebbins wrote: > > I find that shoe paint (spray can), bought at your local shoe repair >> place works well too. M >> >> >> ----- Original Message ---- >> From: Doug Fitz-Randolph <fitzr@SUSCOM-MAINE.NET> >> >> Some of the brown plastic pieces - e.g. defroster vents - on my '82 >> were >> quite faded. I found a spray paint color that is almost an exact >> match for >> the original brown plastic color and repainted them with great >> results. The >> paint is Krylon Ultra-flat Camouflage 4292 Brown "Made with Fusion for >> Plastic paint technology". I think with this stuff one could use more >> commonly available black parts and just paint them to match the >> stock brown >> interior. FYI I have used other colors of this paint to stripe wires >> - i.e. >> make a white wire blue & white - and it dries well and remains >> flexible. >> Rust-o-leum did not work so well - it never really dried past tacky >> on the >> plastic - so perhaps there is something to this "Fusion for Plastic >> paint >> technology". >> >> Hope someone finds this info helpful. >> >> Cheers, >> Doug Fitz-Randolph >> Freeport, ME >> >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.