> pull back on your wiper stalk to set the speed..its all in the archives how > to do it, ive explained it many, many times before :<) errr.... that's not how MY "relay 99" module works. The real VW 99 module works by flipping down to INTERMITTENT for at least one wipe, then up to OFF, then back down to INTERMITTENT again after the desired delay. The "pull back to WASH" setting method is how the crappy aftermarket modules work. I bought one of those and found it was thoroughly nonintuitive. It lives in my junk box of old relays now. -- John Bange '90 Vanagon - "Lastwagen" '90 Vanagon GL - "Wiesel" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.