Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2008, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 21 Jun 2008 08:15:19 -0700
Reply-To:     Anthony Zygmunt <tzygmunt@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Anthony Zygmunt <tzygmunt@YAHOO.COM>
Subject:      Re: What's the easiest way to drop a stock engine? and some info
              on floor jacks.
Comments: To: Don Hanson <dhanson@GORGE.NET>
In-Reply-To:  <000701c8d2db$b34d0860$4001a8c0@gateway.2wire.net>
Content-Type: text/plain; charset=us-ascii

Has anyone ever tried to use on of those motorcycle jacks for engine removal? It looks like the two rail on the jack could be positioned on each side of the engine, so that it is nice and stable.

--- On Fri, 6/20/08, Don Hanson <dhanson@GORGE.NET> wrote:

> From: Don Hanson <dhanson@GORGE.NET> > Subject: Re: What's the easiest way to drop a stock engine? and some info on floor jacks. > To: vanagon@GERRY.VANAGON.COM > Date: Friday, June 20, 2008, 8:44 AM > I would be careful if you do the job with one of those > Harbor Freight > floor jacks that are so inexpensive and light. I have one > that I like, but > the release/lowering function is not very precise. It > often sticks as you > turn the handle to release the hydraulic pressure and lower > the jack. Other > than that minor fault, which you can work around, those > aluminum floor > jacks, China copies of $1000k racetrack jacks, are really > great..lift an end > of my van with no problem and you can carry the whole jack > with one hand, > easily. > Don Hanson > > Date: Thu, 19 Jun 2008 11:53:33 -0700 > From: Brendan Slevin <totorovan@GMAIL.COM> > Subject: I used a similar set up, with out the bricks > though. I took out > Totoro's > engine with a floor jack underneath and a 4x4 wooden beam > with a ratchet > strap up top. the ratchet strap/4x4 were really more for > "safety" if you > can call it that, I just didn't want the engine to fall > off the jack. Put > it in the same way nice and easy. A little finesse lowering > the jack, then > the ratchet, then the jack etc. > > Brendan


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.