There's a bolt place jn Waterloo IA called Scot's supply. He had some M10's that were the grade 10 and were like 7" long. I was in today and he had 14x1.5 all thread in the grade 10. Chances are he'll have the 12's. 319-235-9620. If you have a Fastenal franchise near you, they might have them too. I love going in there to snoop. There's one of those in Cedar Falls. Be intersting to compare prices anyway. DM&FS At 11:38 PM 6/23/2008, David Marshall wrote: >Is there any rhyme or reason to VW bolt part numbers? > >I am >looking all thru ETKA for an application that uses M12x1.5x120 so that I >don't have to a box of 50 of the bolts when all I need is four - would be >cheaper to get them from the dealer... > >N 010 1675 = M12 x 1.5 >x 105mm (Vanagon rear trailing arm) >N 010 1891 = M12 x 1.5 x 110mm >(Vanagon front control arm) > >David Marshall > >http://www.hasenwerk.ca >Box 4153, Quesnel BC, Canada V2J 3J2 > >Engine Conversion FAQ - http://www.hasenwerk.ca/faq |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.