Two days ago, it was half a needle width below the top solid white line! But, after going through the system w/ an IR temp gauge, it was found that my 1-year-old thermostat wasn't opening all the way. After replacing that, the fan now kicks on around a needle width over the red flashing LED. Andrew '87 GL -----Original Message----- From: David Beierl [mailto:dbeierl@attglobal.net] Sent: Thursday, June 26, 2008 11:39 AM To: Richards, Andrew Cc: vanagon@GERRY.VANAGON.COM Subject: Re: temp guage read-out What does your gauge read when the radiator fan comes on? david At 01:53 PM 6/26/2008, Richards, Andrew wrote: >I didn't really get a black & white answer. Lots of variables it seems. >I intend to check the voltage regulator in the dash and am having my |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.