Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 24 Jun 2008 11:13:27 -0400
Reply-To:     Benoit <huotb@VIDEOTRON.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Benoit <huotb@VIDEOTRON.CA>
Subject:      Re: Syncro bad handling problem
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY125-F36FF8297D73A003D860AB5A0A10@phx.gbl>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Hi Dennis, in fact, the rear is a bit lower than the front.

What i'm sure of, it's very heavy in the back. Still, the other syncro i have restored was heavy too and was very stable on the highway and curves with the same tires. That said, this one as a higher center of gravity. The custom interior is massive and mostly in the back. The tire carier, the ladder and the 2.5L Subi doesn't help.

I have a feeling of "rolling" when i start loosing control. So something is soft.

Ben

Dennis Haynes wrote:

> Hard to tell in the pictures but is the rear jacked up higher than the > front? Vanagons do not like that. Check the Caster of the front end > and radius rod mounts. Jacking the rear will reduce the caster angle > and cause the twitchy over steering. > > Dennis > > >> From: Benny boy <huotb@VIDEOTRON.CA> >> Reply-To: Benny boy <huotb@VIDEOTRON.CA> >> To: vanagon@GERRY.VANAGON.COM >> Subject: Syncro bad handling problem >> Date: Tue, 24 Jun 2008 10:01:47 -0400 >> >> Hey all, i'm stuggling to find an handling problem on a customer van. >> So i >> wonder if any of you ever had that problem. >> Van oversteer dangerously wile turning at speed over 40mph, loose >> rear end, >> rear want to go in front when turning It's almost scary sometime. >> The van is HEAVY, i can barely lift this one on my electric lift in >> the shop. >> It's also very sensitive to wind. >> >> Condition: Big Syncro, custom interior (heavy), of course, big tire :-) >> Rear tire rack, ladder in the back, 2.5 Subi, new shock and spring >> on all >> wheel, no loose or play anywhere (of i can see), front stab bar is fine. >> The spring are not from GoWesty but from another reseller, i just don't >> remember the name. >> >> I thought about a rear trailling arm bushing problem but i see no >> play at >> all. This problem just happen lately, i mean i didn't like the >> handling of >> this van last year when i did some stuff on it but now it's worse >> than ever. >> >> Here is the van (tire where replace): >> http://www.benplace.com/jp_syncro.htm >> >> van look very similar and as now the same tire as the Syncro that i >> restored >> lately: >> http://www.benplace.com/87_syncro2.htm >> >> I know, it's not much and it's dificult to give advices when you >> don't feel >> and see the problem but maybe some of you had a similar handling >> problem??? >> >> Any info would be appreciated. >> >> Cheers, Ben > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.