VANAGON archives -- June 2008, week 4 (#217)

Date:         Wed, 25 Jun 2008 21:10:31 -0500
Reply-To:     Larry Alofs <lalofs@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Larry Alofs <lalofs@GMAIL.COM>
Subject:      Re: Got AC Belt, now to put it on
Comments: To: B Feddish <bfeddish@netreach.net>
In-Reply-To:  <2E6CD75EA5814CD5A01301175F19F999@cspfr2>
Content-Type: text/plain; charset=ISO-8859-1

If you replace that hose with a longer one, you can reroute it so that it
doesn't go thru that belt.
Save your self some trouble in the future.

Larry A.


On Wed, Jun 25, 2008 at 9:23 AM, B Feddish <bfeddish@netreach.net> wrote:

> OK, my local FLAPS had the AC belt.  I'm staring into the engine
> compartment
> and it looks like I have to pull off that hose to the upper coolant
> reservoir.  It appears I'm going to have allot of coolant all over the
> place
> if I take that hose off. And lots of bleeding to do again. Is there some
> trick to R&R'ing that hose?
>
>
>
> Thanks,
> Bryan
>

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.